Radial Drilling Machine | Model : | HOR-D1600 | ||
Specification | (mm) | (in.) |
||
Distance of column sleeve surface to spindle center | Max. | C | 1630 | 64 1/8 |
Min. | D | 380 | 15 |
|
Vertical travel of arm | E | 820 | 32 1/4 |
|
Distance of base plate to spindle end | Max. | F | 1555 | 61 1/8 |
Min. | G | 435 | 17 1/8 |
|
Spindle stroke | H | 300 | 11 3/4 |
|
Spindle head horizontal travel | I | 1250 | 49 1/8 |
|
Column sleeve diameter | J | 390 | 15 1/4 |
|
Height of column | K | 2910 | 114 5/8 |
|
Max. hight of machine | L | 3195 | 125 7/8 |
|
Base floor space | M*N | 2360 * 940 | 93 * 37 |
|
Base working surface | 1640 * 930 | 64 1/2*36 5/8 |
||
Floor space | 2700*1250 | 106 * 49 |
||
Drilling Capacity | in steel (S45C) | 50 | 2 |
|
Tapping Capacity | in steel (S45C) | M50 | 2 |
|
Spindle Diameter | Quill | 105 | 4 1/8 |
|
Feeds per rev. | 0.06-1.12 | |||
Number of feeds | 12 | |||
Spindle speeds | 50Hz | min-1 | 25-1310 | |
Number of spindle speeds | 12 | |||
Taper hole | Morse taper | No.5 | ||
Main motor | kW | 3.7 | 5HP |
|
Arm erevating motor | kW | 1.5 | 2HP |
|
Clamping motor | kW | 0.75 | 1HP |
|
Coolant pump motor | kW | 0.10 | ||
Mass of machine | kg | 5200 | 11500lbs |
|
Table size | mm | 500*650*400 | ||
Note : Any of the main dimensions of each model are subject to change without notice. |